| |
|
|
 Products |
The metal orifice ripple padding is drills a hole, the rolling small grain in the metal thin steel plate surface, the big ripple finally assembles becomes, has the resistance mean spirited fluid distribution even, efficiency high, flux big, the scale-up effect is not obvious and so on the characteristic, applies to the negative pressure, the atmospheric pressure and pressurizes the operation. Transforms the plate tower effect with the metal orifice ripple padding especially to be obvious. Processing padding tower diameter scope for phi 150mm-12000mm above. The next table is the metal orifice ripple padding characteristic data: |
Type |
1/m |
m2/m3 |
MPa/m |
% |
M/s |
kg/m3 |
m3/m2.hr |
SM-125Y |
1-1.2 |
125 |
2x10-4 |
98.5 |
3 |
85-100 |
0.2-100 |
SM-250Y |
2-3 |
250 |
3x10-4 |
97 |
2.6 |
170-200 |
0.2-100 |
SM-350Y |
3.5-4 |
350 |
2x10-4 |
95 |
2.0 |
240-280 |
0.2-100 |
SM-500Y |
4-4.5 |
500 |
3x10-4 |
93 |
1.8 |
170-200 |
0.2-100 |
SM-125X |
0.8-0.9 |
125 |
1.4x10-4 |
98.5 |
3.5 |
85-100 |
0.2-100 |
SM-250X |
1.6-2 |
250 |
1.8x10-4 |
97 |
2.8 |
170-200 |
0.2-100 |
SM-350X |
2.3-2.8 |
350 |
1.3x10-4 |
95 |
2.2 |
240-280 |
0.2-100 |
SM-500X |
2.8-3.2 |
500 |
1.8x10-4 |
93 |
2.0 |
170-200 |
0.2-100 |
|
Note:
1. In the table arranges in order in the pressure drop value and the table "the biggest F factor" the value corresponds.
2. In the table arranges in order the specific weight value for the stainless steel products archery target padding specific weight, other material specific weights must while by the selection archery target specific weight and the stainless steel specific weight ratio, if the aluminum nature orifice ripple padding must ride by 0.34.
3. The carbon steel material archery target generally must be thicker than the stainless steel, its padding specific weight is 340-400kg/m3.
4. Uses in when the absorption the liquid load is 0.2-200m3/m2hr. |
|
|
Break up and pile the packing
